New Table Top 2016
We had a fold up table whose surface was starting to peel. So we decide to place the contact paper-like surface with a new piece of 2 mm thick hardwood plywood. Here are the photos of the project.
Select
All
None
Send feedback
01. Original Table's surface was starting to peel, replacement hardwood plywood leaning against the table
02. After removing as much as the old surface as possible by hand using a scraper
03. After sing Goof Off to remove the remaining original surface
04. After sanding the particle board smooth
05. Measuring and trimming hardwood plywood to the right size
06. Staining using Minwax Colonial Maple shade 223 Penetrating Stain
07. Ready to apply first coat of Minwax Polycrylic protective finish
08. First Coat of Polycrylic finish applied
09. After 2nd coat of Polycrylic
10. After 3rd Coat of Polycrylic finish applied
11. After dew and rain intercede during the drying of the 4th coat of Polycrylic finish, Sanding and 5th coat of Polycrylic fixed it all.
12. New surface glued and finished
13. Phelan sitting on the refinished table.